SLF Painting Portal ReCo-Painter - Paint Spraying Systems

Some paragraph content...


  1. SLF ReCo-Painter Flyer
  2. Painting Line – Bombardier
  3. Paint Spraying Line – F.X. Meiller – Commercial Vehicles
  4. Open-space Paint Spraying System with Telescopic Dryer – Formoso
  5. Large-capacity Paint Spraying System & Finish Area – Wirtgen
  6. Surface Treatment Centre – Petricio – Data Sheet
  7. Surface Treatment Centre – Siemens Wien – Data Sheet
  8. Open-space Paint Spraying System with Telescopic Dryer & Blast Room – Codeme – Data Sheet
  9. Blastrooms, Combined Paint Spraying & Drying Booths & Open-space Paint Spraying System – SIAG – Data Sheet
  10. Blastrooms & Open-space Paint Spraying Systems – Steelwind – Data Sheet
  11. Blastroom & Open-space Paint Spraying Systems with Telescopic Drying Tunnel – ZSK – Data Sheet
  12. Blastroom & Open-space Paint Spraying System with Telescopic Dryer – JÖST – Data Sheet
  13. Blastroom & Open-space Paint Spraying System with Movable Telescopic Dryer – Schone & Bruns – Data Sheet
  14. SLF Product Catalogue
  15. SLF Customer Magazine
  16. SMS Fabrication & Steel Processing Metalworking Machinery Portfolio







We invest much passion and professionalism in the planning, design and assembly of your surface treatment plant – however, it is a high tech product which after purchase is subject to certain regular care in order to work smoothly on a sustainable basis.

During commissioning, we provide maintenance records individually adapted to your surface treatment plant that exactly defines the essential maintenance works to do at your plant and their regular cycles.

If there are nevertheless any problems with your plant, we offer a technical emergency service that can be reached by phone (+49 (0) 2572 1537-3). The dysfunction message acceptance is provided 24 hours a day, also at weekends. The following working day one of our qualified service representatives will visit you to directly start with damage repair at your plant.

Preventive maintenance instead of repair
In addition, you have the possibility to conclude a maintenance contract for your surface treatment plant. Based on this contract our specialists regularly take care of the inspection of your plant and take measures if necessary. In this way, you increase plant availability and protect it from unpleasant surprises.


The right wear parts are an essential prerequisite for smooth functioning and for professional and preventive maintenance of your plant.

Beside wear parts for our plants we also carry wear parts from plants of external providers. If you are no customer of our services department up to now, just contact us and convince yourself of our first-class service!






The SLF “ReCo-Painter®” has been especially developed by us to coat large rectangular components such as box bodies for trailers, containers with small undercuts automatically, reproducibly, efficiently and quickly. Great importance was attached to easy handling and operation of the “ReCo-Painter®”. The automatic contour detection of the components contributes in particular to this, which eliminates the need for time-consuming programming of the component geometry.

The painting portal has 3(4) movement axes and can be extended with 2 additional movement axes so that the double lifting columns can be used independently of each other.

The “ReCo-Painter®” can be used with water-based paint or solvent-based paint and, depending on the characteristics of the paint material, it can also be used for a “wet-on-wet” coating process. The coating can be applied either at low pressure or at high pressure. Particularly advantageous are the short make-ready times for a colour change due to the travelling decentralized paint supply. Depending on your requirements, an extension to a central paint supply is possible.

Flexible Use

The high flexibility is particularly evident in the possibility to carry out the automatic coating process with the “ReCo-Painter®” as well as the manual coating for a possibly required pre- or post-coating, simultaneously (!) in one booth. The use of lifting work platforms inside the booth for manual coating is also possible, along with the use of the “ReCo-Painter®” in combined spray and drying booths.

By the way, the “ReCo-Painter®” can also be integrated into existing booths. Please ask us, we will be happy to check whether this possibility also exists for you.

Advantages of the “ReCo-Painter®”

    • Significant reduction of painting times by up to 70%.
    • High coating quality with reproducible constant coating thicknesses.
    • Reproducibility of coating quality.
    • Reduction of paint consumption due to improved application efficiency.
    • Efficient personnel deployment.
    • Short make-ready times – fast colour changes possible.

Auditable, deliverable, measurable and evidence-based metrics will be provided so your strategic team can calculate the ROI, capacity increase and man-hours reduced from an SLF Painting Portal ReCo-Painter® Paint Spraying System. SMS will evaluate your current position and ongoing strategy, we will then assess any gaps to successfully deliver to your business and your clients.

Photos source: SLF Oberflächentechnik GmbH.

Expert Insights on SLF