Faccin are market leaders in the production of 3, 4 or variable geometry plate rollers with decades of expertise in the manufacture of state of the art plate rollers. You can be confident that your machine will be fit for purpose. One of the big challenges when investing in plate rollers is not all machines are created equal.
Beware of buying on specification and price because in real terms the art and science of plate rolling has to factor in a huge range of aspects such as, spring back, flat end, top roll diameter, tensile strength of different alloys, linear guide compared to planetary guide plate rolling machines, material handling options and many other technical aspects that will impact on the ROI. SMS recommends that you engage with the diagnostic approach to these challenges which will ensure that a combination of appropriate research and Faccin expertise will delivers what you require.
Product Specifications
100% Manufactured in Faccin factory in Italy including the forged rolls
Number one plate roll manufacture in the world today
Linear guide machine not planetary guide
Special designed top roll and cambering solutions available
Ex Stock delivery available from Italy
Deep experience in windtower manufacturing
Ask for the video of windtower shell rolling today
Sister company BIKKO can offer planetary guide solution upon request
Product Description
Faccin 4 HEL 4 rolls to roll upto 6" thick material
Four roll plate bending rolls are considered as the most versatile, precise and easy to use plate roll.
The rear lateral roll, opposite to the feeding side, can be used as a back gauge for immediate plate squaring, resulting in very easy plate alignment and “one man operation”.
After the plate is squared, it is always securely clamped between the top and bottom central pinch rolls, therefore prebending and rolling operations are safe and precise without the risk of the plate slipping.
The pre bending operation does not require the plate to tilt below the feeding level (as with traditional 3 roll machines), therefore horizontal motori-zed roller tables can be used to further improve the Introduction of the plate between the rolls.
The cylinder can be rolled to the diameter needed, immediately after the pre bending of the leading edge. This means that the machine needs less valuable workshop space, as an area for plate feeding is on one side of the machine only.
The bending of the trailing edge is carried out after the cylinder is rolled. Basically, cylinders can be rolled in one pass, in one direction.
Cone rolling is much easier, the side rolls are tilted to determine the cone angle and the central lower roll can also be tilted to clamp and drive the plate.
Because of the guaranteed clamping and driving of the plate during all the phases of the rolling process, The four roll machine is the only plate rolling technology that can be controlled effectively through NC and CNC systems.
